If you walked into RIDGID’s official storefront expecting to grab a branded driver bit set off the shelf, you’d come up empty. DeWalt has one. Milwaukee has one. RYOBI, Makita, Bosch, and Craftsman all sell standalone multi-bit driver bit sets on their own sites. RIDGID, for whatever reason, does not — at least not on powertools.ridgid.com. That’s a genuinely unusual gap for a major cordless power tool brand, and it’s the first thing any RIDGID owner should know before spending money hunting for a bit set that may not officially exist.
What RIDGID actually sells on its own site
Search RIDGID’s storefront and the closest thing you’ll find to a bit “set” is the Bit Holder and Screw Set, model AC10BH1. It doesn’t include bits. What it does is hold them: RIDGID says it “Conveniently Stores Standard 1/4 in. Hex Shank Bits” and is “compatible with most RIDGID tools.” Note that wording — “most,” not “all.” So even RIDGID’s own accessory page stops short of universal compatibility, which matters if you’re trying to cover a full lineup of drills and drivers.
That’s it for official RIDGID bit accessories on the brand’s own site. No 40-piece set. No impact-rated assortment. Just a holder, sold separately, and a single bit tossed into one impact driver kit.
The one bit that comes with a RIDGID impact driver
Take the 18V Brushless Cordless 4-Mode Impact Driver Kit (R862312K). It’s a serious tool: RIDGID rates it at 2,400 in./lbs of torque, 40% faster driving than the R86002 model, a top speed of 3,400 RPM, and 4,300 blows per minute. It has “3-speeds and a self-tapping mode to prevent overdriving, breaking, or stripping screws,” and RIDGID states the kit is “100% compatible with all RIDGID 18V batteries.”
In the box, the kit lists: “belt hook with screw, bit holder with screw, driving bit, hard case” — alongside the driver, battery, and charger. One driving bit. Not a set. Not even a small assortment. If you’re buying that kit as your entry into RIDGID, your bit situation is basically unchanged the moment you open the case.
The step-down 18V Cordless 1/4 in. Impact Driver (R860021B) is the same story in a lighter package: “1,850 in./lbs. of torque” and “speeds up to 2,800 RPM via variable speed trigger.” Same chuck type, same standard bit requirement, same absence of a bundled set.
The practical payoff: any standard 1/4″ hex bit set works
Here’s where the story gets better. RIDGID’s impact drivers don’t use some proprietary bit format. The R860021B specs list a “1/4 in. Hex Quick-Eject Chuck” — the same universal hex-shank design you’ll find on DeWalt, Milwaukee, Makita, RYOBI, Bosch, and Craftsman impact drivers. Mechanically, it’s an open standard, not a walled garden.
That means you don’t have to wait for RIDGID to launch a bit set. Bosch’s own Impact Tough™ product pages make this explicit: the bits use a “Hex shank for maximum power transfer in standard three-jaw drills and hexagonal drill driver chucks” and, more directly, “Fits tools of most brands.” Those are Bosch’s own words about the same style of standard hex-shank bit that RIDGID’s impact driver accepts.
So the compatibility conclusion is straightforward, and it’s grounded in what both brands say themselves: a RIDGID impact driver has a standard 1/4″ hex chuck, and Bosch explicitly states its hex-shank bits fit tools of most brands. Translation: any standard 1/4″ hex bit set — Bosch Impact Tough, DeWalt, Milwaukee, Makita, a house brand from your local hardware store — will physically work in your RIDGID driver.
This isn’t a claim that RIDGID endorses Bosch bits specifically. It’s a mechanical observation drawn from RIDGID’s own stated chuck type and Bosch’s own stated cross-brand compatibility claim. If the shank is 1/4″ hex and the chuck is 1/4″ hex, the fit is the fit.
What about RIDGID-branded bit sets elsewhere?
None of the above means RIDGID-branded bit sets don’t exist anywhere. Third-party retailers like Walmart, eBay, and Amazon do list RIDGID-branded sets such as the AC96106 and AC10D43. The point is that RIDGID’s own site doesn’t carry them, so you’re buying through a middleman without the direct product support you’d get from an official page. For most people, that’s less useful than just buying a proven standard hex-shank set from a brand that openly supports cross-tool use.
What to actually do
Don’t wait on RIDGID. If you own a RIDGID impact driver and need bits, buy any reputable standard 1/4″ hex-shank driver bit set. Look for impact-rated bits if you’re driving into wood, metal, or masonry, and look for a set with the sizes and tip types you actually use — Phillips, square, Torx, and nut drivers cover most household jobs. Bosch’s Impact Tough line is one straightforward option because Bosch itself states its hex-shank bits “fit tools of most brands,” which directly applies to RIDGID’s standard chuck. But mechanically, the brand on the bit box matters far less than whether the shank is standard 1/4″ hex.
How this was checked
Facts on this page are drawn from RIDGID’s own Bit Holder and Screw Set, 18V Cordless 1/4 in. Impact Driver, and 18V Brushless Cordless 4-Mode Impact Driver Kit product pages, plus Bosch’s own Impact Tough bit set pages referenced from this site’s Bosch bits guide.
Sources checked: 2026-08-11. A new review date will only be set after the linked pages are re-checked.